Your Definitive Guide Around The NBN Connection Box
- What is The NBN Connection Box?
- What Types of Connections Require The NBN Connection Box?
- What if I Don't Have An NBN Connection Box?
The nbnTM connection box is also referred to as the Networking Termination Device (NTD) or the Network Termination Unit. This refers to the device located in your premises which the nbn connection plugs from the network. These are either brought to you via FTTP, hybrid fibre-coaxial, copper, wireless and satellite.
Broadband connections must entail that you learn more about what this connection box offers.
The connection box is plugged with the modem or router, allowing you to access the Internet whenever you need to. The Internet is necessary to let you check on your news feed, or communicate with your relatives abroad.
Before moving forward with the article, let’s take a look at the topics for discussion.
Once installed, the box should be mounted on the wall within your premises. The device may appear different on your premise or area but may appear like your common modem.
The box, according to the customers who have them currently, looks like a telephone wall socket in their places of residence, wherein once plugged over to their modem or phone, they can start getting access to the broadband or phone services. It isn’t very simple as it may seem, but these technicalities should lead you to connect to the Internet in no time upon signing up.
The box in your premises
Once the nbn technician arrives at your premise, they shall be able to provide the best places where the NTD is, and will be close to your wall socket. Otherwise, they will determine the ideal entry point into your establishment for these connections. These are applicable for the FTTN, FTTB, HFC, FTTP, satellite or wireless.
As you select the location for the box, one of the major considerations is the location between your wall socket and the area where the current equipment is placed. Remember: it has to be situated in an area that is cool, dry and away from any dust that could hamper the workings of the NTD or the connection box.
Should the location between the nbn NTD and your device are far away, homeowners are advised to obtain a licensed data cabler to perform the operations between the device and the NTD.
The nbn box has various ports where you can plug the network cables with. These are the following:
- UNI-D1, UNI-D2, UNI-D3 and UNI-D4
- UNI-V1 and UNI-V2
To get to these in detail, the UNI-D ports are in-charge of providing broadband Internet and data services. Organisations like innoTel make use of these to offer both voice-over IPs and nbn broadband to customers.
Meanwhile, your UNI-V ports are for your phone services, but are not used greatly by innoTel nbn groups.
Major differences with other kinds
You might have also be offered the nbn utility box or otherwise known as the PCD or Premises Connection Device. Did you know that this is different from the NBN Connection Box?
The utility box refers to the box set up on the outer walls of your home connected to the property and ttoward the network provider’s fibre optic cable along the street. It is different from the box installed inside the premises and connected to the outside utility box. The distinctive quality is, the nbn box is where you plug in the modem.
The nbn is the re-branded trademark of the National Broadband Network, a wholesale open-access data network venture based in Australia that offers wired and radio communications. The company likewise provides Internet services, contacted with retail service providers to sell broadband Internet to consumers nationwide